background image

ZyXEL Confidential 

 

9/34 

4.

 

Crash happens on P660HW-T1 v2.The dump message is attached, which is same 
with the customer’s. 

27.

 

[BUG MERGE] 

SPRID:

 

080429313  

Symptom:

 

Connect DUT with G202, AG-225H or AG220 client and WPK2-PSK 

mode, DUT will crash 
Condition:

 

 

Topology: AP)))))) DUT 
Step1: default romfile 
Step2: In GUI

Wireless LAN, Security Mode choose WPA2-PSK, and input 

Pre-Shared Key, apply. 
Step3: use G202, AG-225H or AG220 client to connect DUT with WPA2-PSK mode, 
DUT will crash, or client can connect DUT successfully, but after a while, DUT crash.  
28.

 

[BUG MERGE] 

SPRID:

 

080418858  

Symptom: Device will crash when lan connect with a P-2302RL-P1, which will send 
out a ICMP packet (Dst is 224.0.0.1)  
Condition:

 

 

Customer connect the P-2302RL-P1 to P-660HW-T3v2, no wan connection , device 
will crash. RD check the crash dump , is should related to the point about IGMP. 
We here use customer’s packet trace , generate the ICMP(DST is 224.0.0.1), then 
connect the PC to lan side , when the packet is sent , device will crash. 
The crash dump and packet trace is attached. (The packet we generated is the index 55) 
Some other device will also suffer this issue  
29.

 

 [BUG MERGE] 

SPRID:

 

080125309 

Symptom: P660HW-T1 v2 WLAN encryption set WPA2-PSK, uses G202 connect to it, 
device crash. 
Condition:

 

 

G202 Driver 6.6.0.0, Utility 2.0.2.In XP OS, just use utility to connect to P660HW-T1 
v2 using WPA2-PSK, the device will crash. 
 

Modification in V3.40(APR.3)b1| 03/13/2008 

1.

 

Change cpu from P2F(P3) to P2H base on 

3.40(APR.2)C0

 

2.

 

Change copyright from “Copyright (c) 1994 - 2006 ZyXEL Communications Corp.” to 
“Copyright (c) 1994 - 2008 ZyXEL Communications Corp.” 

3.

 

Change modem code from 3.5.18.8 to 3.10.1.0 

4.

 

Change HW version from 1 to 2 for support P2H 

5.

 

[BUG FIX] 
[Symptom]: User can get rom-0 via http://<IP Address>/rom-0 without authentication.  
[Condition]: N/A  

6.

 

 [BUG FIX] 
[Symptom]:  Device  will  crash  when  running  p2p  download  over  Wi-Fi  with  pppoe 

encapsulation and firewall on. 

[Condition]: N/A

 

 

7.

 

[BUG FIX] 

Summary of Contents for P-660HW-T1 V2



































Reviews: