ZyXEL Confidential
4/34
- start a browser
- go to web interface (default : 192.168.1.1)
- click Login (no change to password)
- The users enters in the Status mode
No modifications possible
(2)Case B :
- start a browser
- go to web interface (default : 192.168.1.1)
- Enter 9999 as password
- click Login
- The users enters in the Status mode
No modifications are possible
No message about wrong password
(3)Case C :
- start a browser
- go to web interface (default : 192.168.1.1)
- click Login (no change to password)
- The users enters in the Status mode
- Click Logout
- Enter 9999 as password
- Click Login
- Loops within the authentication page (rpAuth.html)
In this case, it’s not possible to enter the Status mode
4.
[BUG MERGE]
SPRID:
080703154
Symptom: Wlan scan by telnet cause device crash.
Condition:
Step1:reset device to factory default
Step2:connect a PC to lan port of device
Step3:telnet 192.168.1.1 in run utility in PC.
Step4:issue command” wlan scan”
Notice:Crash happens when some AP around hide SSID
5.
[BUG MERGE]
SPRID:
080708339
Symptom: If turn on “ip mcast 0” to do IPTV both in lan and wlan at the same time, the
CPU loading will be 100%.
Condition:
Step1. Default romfile.
Step2. Configure two PVC, PVC1:PPPoE Router to Internet and IPTV VoD,
PVC2:RFC1483 bridge for IPTV multicast. Triple Play disabled.
Step3: Open 5~6 channels in IPTV server, STB in LAN plays IPTV only, CPU loading
