ZyXEL Confidential
17/34
lan filter [incoming|outgoing] [tcpip|generic]
[set#1] [set#2] [set#3] [set#4]
Set LAN filter to be incoming/outgoing or protocol /device
and the filter set could be 1-12, 0 means empty
Example:
Lan filter incoming tcpip 1 0 0 0
Menu 3.1
lan dhcp mode [server|relay|none]
Set DHCP mode to be”server”, “relay”, “none”
Menu 3.2
lan dhcp server dnsserver [pri dns] [sec dns] Set primary and secondary LAN DNS server
Menu 3.2
lan dhcp server pool [start-address] [num]
Set DHCP start address and pool size
Menu 3.2
lan dhcp server gateway [IP address]
Set DHCP gateway
Menu 3.2
lan dhcp server netmask [subnet mask]
Set DHCP subnet mask
Menu 3.2
lan dhcp server leasetime [second]
Set DHCP lease time
Menu 3.2
lan dhcp server renewaltime [second]
Set DHCP renew time
Menu 3.2
lan dhcp server rebindtime [second]
Set DHCP rebind time
Menu 3.2
lan dhcp relay server [IP address]
Set IP address of DHCP relay server
Menu 3.2
lan display
Display LAN or IP alias parameters
Display Menu 3
lan clear
Clear the Working Buffer
lan save
Save LAN related parameters
wan node index [1-8]
Set the node pointer to specific wan profile. If you want to set
WAN profile, please use this command first, system will use
the index number for pointing to specific PVC (remote node),
and for consequent commands reference, if index = 1 means
it’s ISP node
Menu 11.1
wan node clear
Clear the parameters of the temporary WAN profile
Menu 11.1
wan node ispname [ISP name]
Enable the name of wan node
Menu 11.1
wan node enable
Enable the wan profile
Menu 11.1
wan node disable
Disable the wan profile
Menu 11.1
wan node encap [1483|pppoa|pppoe|enet]
Set the wan protocol
Menu 11.1
wan node mux [vc|llc]
Set the wan multiplex
Menu 11.1
wan node ppp authen [chap|pap|both]
Set PPP authentication type
Menu 11.1
wan node ppp username [name]
Set PPP username
Menu 11.1
wan node ppp password [password]
Set PPP password
Menu 11.1
wan node service [name]
Set PPPoE service name
Menu 11.1
wan node bridge [on|off]
Set the wan bridge mode
Menu 11.1
wan node routeip [on|off]
Set the wan IP routing mode
Menu 11.1
wan node callsch [set1#][set2#][set3#][set4#] Set call schedule set, set number 0 means empty
Menu 11.1
wan node nailedup [on|off]
Set nailed up connection on/off
Menu 11.1
wan node vpi [num]
Set the wan vpi. Range : 0~255
Menu 11.6
wan node vci [num]
Set the wan vci. Range : 32~65535
Menu 11.6
#ifndef VBR-RT
wan node qos[ubr|cbr|vbr]
Set the wan QoS type to be UBR ,CBR,or VBR
Menu 11.6
#else
wan node qos[ubr|cbr|vbr_nrt|vbt_rt]
Set the wan QoS type to be UBR, CBR,VBR_nrt or VBT-rn Menu 11.6
#endif
wan node pcr [num]
Set the wan PCR value
Menu 11.6
wan node scr [num]
Set the wan SCR value
Menu 11.6
wan node mbs [num]
Set the wan MBS value
Menu 11.6
wan node wanip [static|dynamic] [address]
Set the wan IP address
Menu 11.3
wan node remoteip [address] [subnet mask] Set the remote gateway IP address and subnet mask
Menu 11.3
wan node nat [off | sua | full] [address
mapping #]
Set type wan NAT mode to be off or SUA or Full feature
Menu 11.3
wan node metric [num]
Set the wan metric number
Menu 11.3
wan node private [yes|no]
Set the wan private or not.
Menu 11.3
