ZyXEL Confidential
28/34
input 22
Need to perform save after this command
wan adsl vchunt Remove <removeNodeId>
<vpi> <vci>
Input remote node ID and vpi, vci value to remove the
specific entry. System will save automatically.
wan adsl vchunt Active <yes|no>
Enable VC auto hunting featurer
wan adsl vchunt display
Display the hunt pool
wan adsl vchunt Clear
Clear the configure buffer
wan adsl vchunt Save
Save current setting into ROM file
wan adsl vchunt timer
The waiting time before checking the hunting table result
wan adsl vchunt Send
Send VC hunt pattern again
wan adsl vchunt result
Check the result of VC auto hunting
wan adsl vchunt debug
wan adsl vchunt again
wan adsl vchunt webredir<enable:0 |
disable:1>
wan hwsar disp
Display hwsar packets incoming/outgoing information
wan hwsar clear
Clear hwsar packets information
wan hwsar sendoam <vpi> <vci> <f5>
<end-to-end> <type:0(AIS) 1(RDI)
2(LoopBack) 3(Continuity Check)>
wan hwsar driver config
wan hwsar driver register
wan hwsar driver
oammode<mode:0(firmware mode) 1(disable
firmware mode)>
wan hwsar driver dischan<channel>
wan hwsar driver tearoam <vpi> <vci> <f5>
<end-to-end> <type:0(AIS) 1(Continuity
Check)>
wan hwsar driver test<vpi> <vci> <count>
<mode:0(send packet) 1(internal loopback)>
wan hwsar debug [on|off]
wan zeroCfg status
wan zeroCfg on
wan zeroCfg off
wan zeroCfg flag <disable (1:zeroCfh /
2:auto-hunt / 4:password / 7:all)>
wan zeroCfg debug 1:enable / 0:disable
ip address [addr]
display host ip address
ip alias <iface>
alias iface
ip aliasdis <0|1>
disable alias
ip arp status <iface>
display ip arp status
ip dhcp <iface>
ip dhcp client release
release DHCP client IP
ip dhcp client renew
renew DHCP client IP
ip dhcp status [option]
show dhcp status
ip dns query address <ipaddr> [timeout]
resolve ip-addr to name
ip dns query debug <num>
enable dns debug value
ip dns query name <hostname> [timeout]
resolve name to ip-addr
