ZyXEL Confidential
10/34
[Symptom]: device will crash will pppoa and syslogs active
[Condition]: 1.configure device and make it can access internet.
2. In GUI, Maintenance > Logs > Log Settings, active syslog Logging and
enter a Syslog Server Address.
3. In GUI, Maintenance > Logs > Log Settings, acitve all the Log.
4. When get wan IP, access internet, refresh lots of web pages.
5. Then it will crash when you want to configure device via GUI
8.
[BUG FIX]
[Symptom]: When using CI command "sys adjtime", it shows "Where is your time
server? Please use menu 24.10 to set up", the information is not suitable on the models
that have not SMT.
[Condition]: 1. in web GUI Maintenance > System > Time Setting choose Manual
model or in CI command sys timeserver protocol
choose 0[none]
2. when using CI command sys adjtime, it shows Where is your time
server? Please use menu 24.10 to set up
9.
[BUG FIX]
[Symptom]: Firewall schedule can't work correctly.
[Condition]: Set 2 rules with same policy, different schedule. Only the 1st one
can work.
10.
[BUG FIX]
[Symptom]: device will crash will pppoa and syslogs active
[Condition]: 1.encap pppoa
2.In GUI, Maintenance > Logs > Log Settings, active syslog Logging and
enter a Syslog Server IP Address.
3.In GUI, Maintenance > Logs > Log Settings, acitve Log "System
Maintenance".
4.when DSL up, the device will crash.
11.
[Bug Fix] SPRID:070427319
[Symptom]:In remote management dns port can't be work after change.
[Condition]: N/A
12.
[BUG FIX]
[Symptom]:RTP packet on PVC3 will leak to PVC1 while tripleplay is enable.
[Condition]:N/A
13.
[BUG FIX]
[Symptom]: In bm rule setup page, if leave the rule name blank and then apply. it can
not enter this page again no matter you choose any other items.
[Condition]:
Step1: Enter GUI->MBM page, select user defined to enter rule setup page.
Step2: Fill in other parameter and leave rule name blank, then click apply to save
this rule.
Step2: In MBM page, on matter you select any choose, it can not enter the rule
setup page again.
14.
[BUG FIX]
[Symptom]:Enable tripleplay, if the port not in any group, the packet from it will not go
out from the unmaped PVC.
[Condition]:
