ZyXEL Confidential
18/34
wan node rip [none|in|out|both]
[rip1|rip2b|rip2m]
Set the wan RIP mode and RIP version
Menu 11.3
wan node multicast [none|igmpv1|igmpv2]
Set the wan IP multicast mode
Menu 11.3
wan node ippolicy
[set #1] [set #2] [set #3] [set #4]
Set WAN IP policy can be specified, and policy set can be
1-12, value 0 means empty
Menu 11.3
wan node bridgetimeout [min#]
Set wan bridge mode, Ethernet address timeout minutes.
Menu 11.3
wan node filter [incoming|outgoing]
[tcpip|generic]
[set #1] [set #2] [set #3] [set #4]
Set WAN filter, incoming or outgoing can be specified, and
filter set can be 1-12, value 0 means empty
Menu 11.5
wan node ppp idletimeout [second]
Set idle timeout.
Menu 11.1
#ifdef DIAL_BACKUP and index = the last
remote node
wan node backup ispname [ISP name]
Enable the name of wan node
Menu 11.1
wan node backup enable
Enable the wan profile
Menu 11.1
wan node backup disable
Disable the wan profile
Menu 11.1
wan node backup ppp authen [chap|pap|both] Set PPP authentication type
Menu 11.1
wan node backup ppp username [name]
Set PPP username
Menu 11.1
wan node backup ppp password [password] Set PPP password
Menu 11.1
wan node backup priph [Pri Phone]
Set backup ISP primo phone
Menu 11.1
wan node backup secph [Sec Phone]
Set backup ISP second phone
Menu 11.1
wan node backup pppopt encap [std | cisco] Set PPP option, standard PPP or CISCO
Menu 11.2
wan node backup pppopt com [yes | no]
Set PPP option, compression or not
Menu 11.2
wan node backup wanip [static|dynamic]
[address]
Set the wan IP address
Menu 11.3
wan node backup remoteip [address] [subnet
mask]
Set the remote gateway IP address and subnet mask
Menu 11.3
wan node backup nat [off | sua | full] [address
mapping #]
Set type wan NAT mode to be off or SUA or Full feature
Menu 11.3
wan node backup metric [num]
Set the wan metric number
Menu 11.3
wan node backup private [yes|no]
Set the wan private or not.
Menu 11.3
wan node backup rip [none|in|out|both]
[rip1|rip2b|rip2m]
Set the wan RIP mode and RIP version
Menu 11.3
wan node backup multicast
[none|igmpv1|igmpv2]
Set the wan IP multicast mode
Menu 11.3
wan node backup script active [yes | no]
Active remote node script
Menu 11.4
wan node backup script set1 [expect] [send] remote node script setting
Menu 11.4
wan node backup script set2 [expect] [send] remote node script setting
Menu 11.4
wan node backup script set3 [expect] [send] remote node script setting
Menu 11.4
wan node backup script set4 [expect] [send] remote node script setting
Menu 11.4
wan node backup script set5 [expect] [send] remote node script setting
Menu 11.4
wan node backup script set6 [expect] [send] remote node script setting
Menu 11.4
wan node backup nailedup [on|off]
Set nailed up connection on/off
Menu 11.1
wan node backup filter [incoming|outgoing]
[tcpip|generic]
[set #1] [set #2] [set #3] [set #4]
Set WAN filter, incoming or outgoing can be specified, and
filter set can be 1-12, value 0 means empty
Menu 11.5
wan node backup idletimeout [second]
Set idle timeout.
Menu 11.1
#endif
wan node save
Save the related parameters of WAN node
wan node display
Display WAN profile configuration in buffer
Display Menu 11
ip route addrom index [Rule #]
Select a Static Route index 1-16 to edit
Menu 12.1
ip route addrom name [Name]
Set Rule Name
Menu 12.1
ip route addrom active [on|off]
Set Active or Inactive Flag
Menu 12.1
ip route addrom set [dest address/ mask bits] Set IP static route
Menu 12.1
