ZyXEL Confidential
2/34
ZyXEL P-660HW-T1 v2 Standard Version
Release 3.40(APR.3)C0
Release Note
Date:
August 6, 2008
Supported Platforms:
ZyXEL P-660HW-T1 v2
Versions:
ZyNOS Version : V3.40(APR.3) | 08/06/2008 13:50:00
Bootbase Version : V1.05 | 03/07/2008 13:32:34
Notes:
The P-660HW-T1 v2, is 4th generation of ZyXEL ADSL product family. It is a high
performance ADSL/ADSL2/ADSL2+ router for small/medium office to have Internet
access and LAN-to-LAN application over the existing copper line. P-660HW-T1 v2 takes
advantage of much higher data rate than ADSL, speed up to 12Mbps (ADSL2) or 24Mbps
(ADSL2+), greater reach, faster start-up, advanced diagnostics and better power
management. This high performance ADSL router is a high integrated advanced Firewall,
Bandwidth Management and IEEE 802.11g wireless features to meet the demand of
high-end market.
P-660HW-T1 v2 provides an embedded mini-PCI module for 802.11g Wireless LAN
connectivity, four single auto-sensing, auto-detection 10/100BASE-T Ethernet ports for
connection to the user’s local network, and a single RJ-11/RJ-45 port for connection to
ADSL/ADSL2/ADSL2+ line.
1.
Support Multiboot client V2.3
2.
Support ADSL2+ by TrendChip modem code 3.10.9.0
Known Issues:
1
．
Set ATM QoS Type= VBR, Peak Cell Rate (PCR) =1000, Sustain Cell Rate (SCR) =
500, Maximum Burst Size (MBS) = 500, Test result it is not steady
2
．
Step1: set remote node 1 ATM QoS Type= VBR_RT, Step2: set remote node 2 ATM
QoS Type= VBR_nRT, Step3: set remote node 3 ATM QoS Type= CBR, Then the
priority remote node 1>remote node 3>remote node 2, (use one node with CBR and
two nodes with VBR_RT and VBR_nRT in any remote node will case priority
confusedly)
3
．
When set multi PVCs and to get Dynamic IP, the TriplePlay and IPRP function doesn’t
work properly
4
．
When DUT is power on and link up, if there are many multicast packets on the wan
sides, the DUT will reboot sometimes.
5
．
IOP issue with Intel 2200BG at WPA2 and WPA2-PSK Mixed mode.
