ZyXEL Confidential
33/34
bm filter wlan add # Daddr <mask Dmask>
Dport Saddr <mask Smask> Sport protocol
Add a filter for class # in WLAN. The filter contains
destination address (netmask), destination port, source
address (netmask), source port and protocol. You may set the
value as 0 if you do not care the item.
bm filter wlan del #
Delete a filter which belongs to class # in WLAN.
bm show interface lan
Show the interface settings of LAN
bm show interface wan
Show the interface settings of WAN
bm show interface dmz
Show the interface settings of DMZ
bm show interface wlan
Show the interface settings of WLAN
bm show class lan
Show the classes settings of LAN
bm show class wan
Show the classes settings of WAN
bm show class dmz
Show the classes settings of DMZ
bm show class wlan
Show the classes settings of WLAN
bm show filter lan
Show the filters settings of LAN
bm show filter wan
Show the filters settings of WAN
bm show filter dmz
Show the filters settings of DMZ
bm show filter wlan
Show the filters settings of WLAN
bm show statistic lan
Show the statistics of the classes in LAN
bm show statistic wan
Show the statistics of the classes in WAN
bm show statistic dmz
Show the statistics of the classes in DMZ
bm show statistic wlan
Show the statistics of the classes in WLAN
bm monitor lan <#>
Monitor the bandwidth of class # in LAN. If the class is not
specific, all the classes in LAN will be monitored.
The first time you key the command will set it on; the second
time you will set it off, and so on.
bm monitor wan <#>
Monitor the bandwidth of class # in WAN. If the class is not
specific, all the classes in WAN will be monitored.
The first time you key the command will set it on; the second
time you will set it off, and so on.
bm monitor dmz <#>
Monitor the bandwidth of class # in DMZ. If the class is not
specific, all the classes in DMZ will be monitored.
The first time you key the command will set it on; the second
time you will set it off, and so on.
bm monitor wlan <#>
Monitor the bandwidth of class # in WLAN. If the class is not
specific, all the classes in WLAN will be monitored.
The first time you key the command will set it on; the second
time you will set it off, and so on.
bm config save
Save the configuration.
bm config load
Load the configuration.
bm config clear
Clear the configuration.
bm debug
bm defaultClassBw
sys firewall acl disp
Display specific ACL set # rule #, or all ACLs.
sys firewall active <yes|no>
Active firewall or deactivate firewall
sys firewall cnt disp
Display firewall log type and count.
sys firewall cnt clear
Clear firewall log count.
sys firewall pktdump
Dump the 64 bytes of dropped packet by firewall
sys firewall update
Update firewall
sys firewall dynamicrule
sys firewall tcprst rst
Set TCP reset sending on/off.
sys firewall tcprst rst113
Set TCP reset sending for port 113 on/off.
sys firewall tcprst display
Display TCP reset sending setting.
sys firewall icmp
