NR2101 User’s Guide
96
C
HAPTER
12
Maintenance
12.1 Overview
Use the system screens to configure general NR2101 settings.
12.1.1 What You Can Do in this Chapter
• Use the
Firmware Upgrade
screen to upload new firmware to your NR2101 (
).
• Use the
Account Configuration
screen to change the NR2101’s system password and configure the
web configurator’s inactive time (
• Use the
About
screen to view the detailed information of software and firmware on the
).
• Use the
Factory Reset
screen to reset your NR2101 settings back to the factory default mode(
• Use the
Logout
screen to log out of the Web Configurator (
).
12.2 Firmware Upgrade
This screen allows you to upload new firmware to your NR2101. You can download new firmware
releases from your nearest Zyxel FTP site (or www.zyxel.com) to use to upgrade your NR2101’s
performance.
Only use firmware for your device’s specific model.
To access this screen, click
Firmware Upgrade
. This screen displays the current firmware version and
status of the NR2101. Click
Upgrade From Local
and the
Select File
tab appears. To update firmware,
click
Select File
to select a file from you local drive to upload to the NR2101.
The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a
successful upload, the system will reboot.
Firmware Over the Air (FOTA) allows for timely and automatic firmware upgrades. You can click
Start
Firmware Upgrade
and check if any update is available.
Do NOT turn off the NR2101 while firmware upload is in progress!
Summary of Contents for NR2101
Page 9: ...9 PART I User s Guide...
Page 55: ...55 PART II Technical Reference...