Chapter 1 Get to Know Your NR2101
NR2101 User’s Guide
22
1.5.6.3 WiFi 5G
To enable a WiFi client to connect to the 5 GHz WiFi band, select
WiFi Enable
. The following screen
displays.
• Tap
Bandwidth
and then select a 5 GHz bandwidth (
20MHz
,
20/40 MHz,
or
20/40/80 MHz
) from the list.
Tap the check mark at the upper-right corner to save the change made.
• Tap
Hide SSID
to hide your SSID from a site survey tool.
Figure 21
5GHz WiFi Bandwidth
• Select
WiFi PMF
to improve security for the WiFi connection (
WiFi PMF
will not be available when
WPA3/WPA2 mixed mode
is selected in the
Security Type
field).
Figure 22
5 GHz WiFi PMF
The following table describes the labels in this screen.
Table 8 5 GHz WiFi
LABEL
DESCRIPTION
WiFi Enable
Select this to enable 5 GHz WiFi connections.
Bandwidth
Select whether the NR2101 uses a
WiFi
channel width of
20MHz
,
20/40MHz,
or
20/40/
80MHz
.
A standard 20MHz channel offers transfer speeds of up to 150Mbps whereas a
40MHz channel uses two standard channels and offers speeds of up to 300Mbps.
40MHz (channel bonding or dual channel) bonds two adjacent radio channels to
increase throughput. The WiFi clients must also support 40MHz. It is often better to use
the 20MHz setting in a location where the environment hinders the
WiFi
signal.
Select
20MHz
if you want to lessen radio interference with other WiFi devices in your
neighborhood or the WiFi clients do not support channel bonding.
Summary of Contents for NR2101
Page 9: ...9 PART I User s Guide...
Page 55: ...55 PART II Technical Reference...
