Chapter 1 Get to Know Your NR2101
NR2101 User’s Guide
20
1.5.6.1 WPS
Your NR2101 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure WiFi network.
WPS is an industry standard specification, defined by the WiFi Alliance.
WPS allows you to quickly set up a WiFi network with strong security, without having to configure security
settings manually. Each WPS connection works between two devices. Both devices must support WPS
(check each device’s documentation to make sure). When WPS is activated on a device, it has two
minutes to find another device that also has WPS activated. Then, the two devices connect and set up
a secure network by themselves.
You can use the LCD screen of the NR2101 to activate WPS in order to quickly set up a WiFi network with
strong security.
Go to the
Settings
>
WPS
screen. The
WPS connect
field will be available after you enable
WPS
. Go to
WPS connect
>
WPS
to activate WPS or enter
WPS PIN
to connect. The following screen displays. Tap the
check mark at the upper-right corner to save the change made.
Figure 18
Enter WPS PIN
The following table describes the labels in this screen.
Note: You must activate WPS on the NR2101 and on another device within 2 minutes of each
other.
1.5.6.2 WiFi 2.4 G
To enable a WiFi client to connect to the 2.4 GHz WiFi band, select
WiFi Enable
.
• Tap
Bandwidth
to select a 2.4 GHz bandwidth (
20MHz
or
20/40 MHz
) from the list. Tap the check mark
at the upper-right corner to save the change made.
• Tap
Hide SSID
to hide your SSID from a site survey tool.
Table 6 WPS
LABEL
DESCRIPTION
WPS
Use this screen to establish a WPS connection.
WPS PIN
Enter the WPS password to enable WiFi clients to connect to the NR2101.
Summary of Contents for NR2101
Page 9: ...9 PART I User s Guide...
Page 55: ...55 PART II Technical Reference...
