Chapter 7 WLAN & WWAN
NR2101 User’s Guide
73
Note: To use the WPS feature, make sure you have WiFi enabled in the
SSID SETTINGS (2.4GHz/
5GHz)
screen.
Click
WPS SETTINGS
and the following screen displays.
Figure 78
WPS SETTINGS
The following table describes the labels in this screen.
7.5 MAC Filter
This screen allows you to configure the NR2101 to exclude specific WiFi client devices from accessing the
NR2101 . Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is
assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. You need to know the MAC addresses of the WiFi client devices to configure this
screen.
Table 26 WPS SETTINGS
LABEL
DESCRIPTION
WPS Enable
Click
Enable
to enable WPS on the NR2101.
Via the WPS
button
Click this to activate WPS on the NR2101 via the WPS button.
WPS
Click this button to connect.
Device PIN
This field is available only when you set
WPS Enable
to
Enable
.
Enter the
PIN Code
of the WiFi client device that you are setting up a WPS connection with, and
then click
Connect
to authenticate and add the cllient device to your WiFi network.
You can find the PIN either on the outside of the WiFi client device, or by checking the WiFi client
device’s settings.
Note: You must also activate WPS on that WiFi client device within two minutes to
have it present its PIN to the NR2101.
Summary of Contents for NR2101
Page 9: ...9 PART I User s Guide...
Page 55: ...55 PART II Technical Reference...
