Chapter 4 Tutorials
NR2101 User’s Guide
50
8
If the WiFi client device keeps trying to connect to or acquiring an IP address from the NR2101, make
sure you entered the correct security key.
If the connection has limited or no connectivity, make sure the DHCP server is enabled on the NR2101.
If your connection is successful, open your Internet browser and enter
http://www.zyxel.com
or the URL
of any other web site in the address bar. If you are able to access the web site, your WiFi connection is
successfully configured.
4.4 Set Up a WiFi Network Using WPS
This section gives you an example of how to set up a WiFi network using WPS in the NR2101’s Web
Configurator. This example uses the NR2101 as the AP and a WPS-enabled Android smartphone as the
WiFi client device.
PIN Configuration
When you use the PIN configuration method, you need to check the WiFi client’s PIN number and use
the NR2101’s configuration interface (see
).
1
Go to your phone settings and turn on WiFi.
2
Log into NR2101’s Web Configurator and go to the
WPS SETTINGS > WPS Settings
screen. Click
WPS
Enable
to enable the PIN configuration.
3
Enter the
Device PIN
of the WiFi client and click the
Connect
button. Activate WPS function on the WiFi
client utility screen within two minutes.
The NR2101 authenticates the WiFi client and sends the proper configuration settings to the WiFi client.
This may take up to two minutes. The WiFi client is then able to communicate with the NR2101 securely.
The following figure shows you how to set up WiFi network and security on NR2101 and WiFi client
(Android smartphone in this example) by using the PIN method.
Summary of Contents for NR2101
Page 9: ...9 PART I User s Guide...
Page 55: ...55 PART II Technical Reference...
