ZyXEL Communications MWR211 Manual Download Page 325

Page: 325 / 340

MWR211 User’s Guide

325

based at SourceForge, and Networks Associates Technology, Inc hold the

derivative work done since then. An additional copyright section has

been added as Part 3 below also under a BSD license for the work

contributed by Cambridge Broadband Ltd. to the project since 2001.

An additional copyright section has been added as Part 4 below also

under a BSD license for the work contributed by Sun Microsystems, Inc.

to the project since 2003.

Code has been contributed to this project by many people over

the years it has been in development, and a full list of contributors

can be found in the README file under the THANKS section.

---- Part 1: CMU/UCD copyright notice: (BSD like) -----

Derivative Work - 1996, 1998-2000

Permission to use, copy, modify and distribute this software and its

documentation for any purpose and without fee is hereby granted,

provided that the above copyright notice appears in all copies and

that both that copyright notice and this permission notice appear in

supporting documentation, and that the name of CMU and The Regents of

the University of California not be used in advertising or publicity

Summary of Contents for MWR211




















































































































































































































































































































































Search results

Summary of Contents for MWR211

Reviews:

Related manuals for MWR211

Brands by name

Popular brands

ZyXEL Communications MWR211, Manual

Search results

Summary of Contents for MWR211

Reviews:

Related manuals for MWR211

Brands by name

Popular brands