ZyXEL Communications MWR211 Manual Download

Page: 256 / 340

MWR211 User’s Guide

256

For dynamically assigned settings, select Using DHCP Server from
the Configure: list.

For statically assigned settings, do the following:

•

From the Configure box, select Manually.

•

Type your IP address in the IP Address box.

•

Type your subnet mask in the Subnet mask box.

•

Type the IP address of your Prestige in the Router address box.

Close the TCP/IP Control Panel.

Click Save if prompted, to save changes to your configuration.

Turn on your router and restart your computer (if prompted).

Verifying Settings

Check your TCP/IP properties in the TCP/IP Control Panel window.

Macintosh OS X

Click the Apple menu, and click System Preferences to open the
System Preferences window.

Figure 159

Macintosh OS X: Apple Menu

Click Network in the icon bar.

•

Select Automatic from the Location list.

•

Select Built-in Ethernet from the Show list.

•

Click the TCP/IP tab.

For dynamically assigned settings, select Using DHCP from the
Configure list.

Summary of Contents for MWR211




















































































































































































































































































































































Search results

Summary of Contents for MWR211

Reviews:

Related manuals for MWR211

Brands by name

Popular brands

ZyXEL Communications MWR211, Manual

Search results

Summary of Contents for MWR211

Reviews:

Related manuals for MWR211

Brands by name

Popular brands