ZyXEL Communications MWR211, Manual

Page: 86 / 340

MWR211 User’s Guide
86
Figure 57 Network > Wireless LAN > Security: No Security
WPA2-PSK has been reworded to WPA-Personal and WPA2-Personal)
The following table describes the labels in this screen.
Table 32 Network > Wireless LAN > Security: No Security
LABEL DESCRIPTION
Security
Mode Choose No Security from the drop-down list box.
Apply Click Apply to save your changes back to the MWR211.
Reset Click Reset to reload the previous configuration for this screen.
Refer to Table 31 Network > Wireless LAN > General for descriptions of the
other labels in this screen.
9.5.2 WEP Encryption
WEP encryption scrambles the data transmitted between the wireless stations and
the access points to keep network communications private. It encrypts unicast
and multicast communications in a network. Both the wireless stations and the
access points must use the same WEP key.
Your MWR211 allows you to configure up to four 64-bit or 128-bit WEP keys but
only one key can be enabled at any one time.
In order to configure and enable WEP encryption, click Network > Wireless
LAN to display the General screen. Select Static WEP from the Security Mode
list.