ZyXEL Communications MWR211 Manual Download Page 322

Page: 322 / 340

MWR211 User’s Guide

322

This Product includes wsc_upnp under the Ralink and Intel License.

wsc_upnp License

///////////////////////////////////////////////////////////////////////////

// Redistribution and use in source and binary forms, with or without

// modification, are permitted provided that the following conditions are
met:

// * Redistributions of source code must retain the above copyright notice,

// this list of conditions and the following disclaimer.

// * Redistributions in binary form must reproduce the above copyright
notice,

// this list of conditions and the following disclaimer in the documentation

// and/or other materials provided with the distribution.

// * Neither name of Intel Corporation nor the names of its contributors

// may be used to endorse or promote products derived from this software

// without specific prior written permission.

// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS

// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT

// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR

// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL
OR

// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL,

Summary of Contents for MWR211




















































































































































































































































































































































Search results

Summary of Contents for MWR211

Reviews:

Related manuals for MWR211

Brands by name

Popular brands

ZyXEL Communications MWR211, Manual

Search results

Summary of Contents for MWR211

Reviews:

Related manuals for MWR211

Brands by name

Popular brands