ZyXEL Communications MWR211, Manual

Page: 135 / 340

MWR211 User’s Guide
135
13.2 What You Can Do
• Use the General screen to enable NAT and set a default server.
• Use the Application screen to forward incoming service requests to the server(s)
on your local network.
• Use the Advanced screen to change your MWR211’s trigger port settings.
13.3 General NAT Screen
Use this screen to enable NAT and set a default server. Click Network > NAT >
General to open the following screen.
Figure 85 Network > NAT > General
The following table describes the labels in this screen.
Table 53 Network > NAT > General
LABEL DESCRIPTION
NAT Setup
Enable Network
Address
Translation Network Address Translation (NAT) allows the translation of an
Internet protocol address used within one network (for example a
private IP address used in a local network) to a different IP address
known within another network (for example a public IP address used
on the Internet).
Select the check box to enable NAT.
Default Server Setup