ZyXEL Communications MWR211 Manual Download Page 306

Page: 306 / 340

MWR211 User’s Guide

306

[email protected] [email protected]

The data format used by the zlib library is described by RFCs (Request for
Comments) 1950 to 1952 in the files

ftp://ds.internic.net/rfc/rfc1950.txt

(zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).

This Product includes curl-7.19.7 under the Curl MIT/X License.

Curl License

Permission to use, copy, modify, and distribute this software for any
purpose

with or without fee is hereby granted, provided that the above copyright

notice and this permission notice appear in all copies.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF
THIRD PARTY RIGHTS. IN

NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR

Summary of Contents for MWR211




















































































































































































































































































































































Search results

Summary of Contents for MWR211

Reviews:

Related manuals for MWR211

Brands by name

Popular brands

ZyXEL Communications MWR211, Manual

Search results

Summary of Contents for MWR211

Reviews:

Related manuals for MWR211

Brands by name

Popular brands