ZyXEL Communications MAX208M2W SERIES, User Manual

Page: 83 / 200

Chapter 6 WiMAX
MAX208M2W Series User ’ s Guide
83
Device
Status
This field displays the MAX208M2W Series current status for connecting
to the selected base station.
Scanning - The MAX208M2W Series is scanning for available base
stations.
Ready - The MAX208M2W Series has finished scanning and you can
connect to a base station.
Connecting - The MAX208M2W Series attempts to connect to the
selected base station.
Connected - The MAX208M2W Series has successfully connected to
the selected base station.
UMAC State This field displays the status of the WiMAXconnection between the
MAX208M2W Series and the base station.
Network Search - The MAX208M2W Series is scanning for any
available WiMAX connections.
Disconnected - No WiMAX connection is available.
Network Entry - A WiMAX connection is initializing.
Normal - The WiMAX connection has been successfully established.
BSID This field displays the MAC address of the base station to which the
MAX208M2W Series is connected.
Frequency
(MHz)
This field displays the frequency the base station uses in megahertz
(MHz).
RSSI (dBm) This field displays the Received Signal Strength Indication (RSSI),
which is an overal measurement of radio signal strength. A higher RSSI
level indicates a stronger signal.
CINR (dB) This field displays the average Carrier to Interference plus Noise Ratio
for the current connection. This value is an indication of overal radio
signal quality, where a higher value means a better quality signal.
Table 16
Connect (continued)
LABEL DESCRIPTION