ZyXEL Communications MAX208M2W SERIES, User Manual

Page: 105 / 200

Chapter 7 Network Setting
MAX208M2W Series User ’ s Guide
105
Click on Network Setting > WLAN > MAC Address Filter . The screen appears
as shown.
Figure 42 MAC Address Filter Screen
This screen contains the following fields:
Table 30 MAC Address Filter
LABEL DESCRIPTION
Enable MAC
Address Filter
Select the check box to enable MAC address filtering. Then, the
following fields display.
Mode
Define the filter action for the list of MAC addresses in the MAC
address table.
Select
Allow listed stations to permit access to the
MAX208M2W Series only to addresses listed. MAC addresses not
listed will be denied access to the MAX208M2W Series.
Select Deny listed stations to block access to the MAX208M2W
Series to the computers or devices listed in this list.
# This is the index number of the MAC address.
Active Select this box to make the policy effective or ineffective for a
particular device.
Name Type the name of the device. The name can be up to 20
characters long, and any combination of letters, numbers or
symbols.
MAC Address
Enter the MAC addresses of the wireless devices that are allowed
or denied access to the MAX208M2W Series in these address
fields. Enter the MAC addresses in a valid MAC address format,
that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Delete Click to delete a specific MAC address from the list.
Add Click to add a MAC address to the list.
OK Click this button when you are done adding a MAC Address.