ZyXEL Communications ENTERPRISE NETWORK CENTER, Manual

Page: 232 / 302

Chapter 8 Application
ENC User’s Guide
234
8.12 AP Manager
This function is available for devices which supports wireless AP.
8.12.1 The AP Profile Screen
Use this screen to configure and look at wireless access point (AP) profiles which help configure
wireless settings for multiple wireless APs. To open this screen, click Application > AP Manager >
AP Profile.
Figure 180
AP Manger > AP Profile
The following table describes the labels in this screen.
Reauthentication
Timer Specify the length of time required to pass before a client has to re-enter his or
her username and password to stay connected to the port.
Apply Click Apply to save your changes.
Reset Click Reset to discard your changes and reset the fields to their settings last time
saved.
Table 110
Port Management > Authentication > 802.1x Authentication (continued)
LABEL DESCRIPTION
Table 111
AP Manger > AP Profile
LABEL DESCRIPTION
Add Click this to create an entry.
Edit Select an entry in the table and click this to modify it.
Remove Select an entry in the table and click this to delete it.
check box Select the check box of an entry and click Edit or Remove to take the action for
the entry respectively. Select or clear the check box at the table heading line to
select or clear all check boxes in this column.
Profile Name This field displays the name of a wireless AP profile.
SSID This field displays the SSID this wireless AP profile uses.
The SSID (Service Set IDentity) identifies the Service Set with which a wireless
station is associated. Wireless clients associating to the access point (AP) must
have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII
characters) for the wireless LAN.
When a wireless client scans for an AP to associate with, this is the name that is
broadcast and seen in the wireless client utility.
Channel This field displays the operating frequency/channel this wireless AP profile uses.