ZyXEL Communications ENTERPRISE NETWORK CENTER, Manual

Page: 126 / 302

Chapter 5 Event
ENC User’s Guide
126
5.2 Event Configuration
This screen shows a list of events that devices or the ENC may generate. By default, each event has
a priority (serverity level) and the corresponding action that the ENC should take when it receives
the event. You can use this screen to modify the severity and action.
To change the severity level and/or action of a default event, click Events > Configuration.
Figure 86
Events > Configuration > Default
The following table describes the labels in this screen.
Table 43
Events > Configuration > Default
LABEL DESCRIPTION
General
Stored Events
Days Specify the number of days you wish to store event logs in ENC before removing
them.
Events Configuration
Activate Select one or more disabled events and click this button to enable them.
Deactivate Select one or more enabled events and click this button to disable them.
Edit Select an event and click this to modify the settings.
Status This field displays whether the event is currently enabled or disabled.
Category This field displays the category to which the event belongs.
Event Name This field displays the name of the event.
Severity This field displays the severity level of the event.
Action This field displays the action the ENC takes when the event was generated.
Apply Click this to save the changes.
Reset Click this to discard the changes and reset the fields to their last saved settings.