Zyris ISODRY, Instructions For Use Manual, Page: 8 / 156

8
Step 3
Place the Cheek Shield into the buccal
vestibule. Move the Isthmus onto the
retromolar pad behind the maxillary tuberosity.
Adjust the Tongue Retractor in the lingual
vestibule as needed. Move the bite block
distally to provide more vertical working room.
Disassembly of the Control Head
Step 1
Press the release button (Figure 7) on the
underside of the Titanium Control Base to
release and disconnect the Vacuum Pipe.
Step 2
Holding the head of the Vacuum Hose,
pull to remove the Titanium Control Base.
Do not twist.
Vacuum
Levers
Vacuum Pipe
Control
Base
Vacuum Tubes
Vacuum Tubes
Figure 7. Control Head
Release
Button
mouthpiece into the buccal vestibule on
the side to receive treatment. Angle the
mouthpiece to allow the lower edge of the
Tongue Retractor to move along the buccal
edge of the teeth.
Step 2
Move the bite block onto the occlusal surface
of the teeth, just distal to the mandibular
cuspid. Instruct the patient to “rest gently” on
the bite block to secure.
Figure 4, 5, & 6. Mouthpiece Placement
Step 1
Step 2
Step 3