Page 6 of 9
Operation and Maintenance Manual
7000 Apple Tree Avenue, Bergen, NY 14416 Phone: (800) 543-2550-Fax: (585) 494-1839-www.libertypumps.com
DWG#7235000I
Manual 7235000I
Operation and Maintenance Manual
Operation and Maintenance Manual
Installation of the ALARM UNIT Continued
3. Continued. If connecting to existing alarm security system or (BAS) system leave terminals + & - open and use 18
gauge 2 conductor wire to connect the existing product to terminals 2A,2B, 1A,1B (Fig. 9). When connected, replace the
access cover and pull the wire through the knockouts on the access cover (See Step #4) .
Caution!
- When installing
wires, route all wires away from sharp objects & internal components.
(Fig. 9)
4. Use a needlenose pliers to remove the desired “break away tabs” from the access cover (Fig. 10). Lightly pull and twist
off tab (s). Replace access cover and run wires through the “break aways” (Fig. 11)
Remove Cover To Insert 9v
Battery. Replace Yearly.
Auxiliary Contacts Inside.
Remove Cover To Insert 9v
Battery. Replace Yearly.
Auxiliary Contacts Inside.
1 2 3 4
(Fig. 10)
Remove Cover To Insert 9v
Battery. Replace Yearly.
Auxiliary Contacts Inside.
(Fig. 11)
+
- 2A 2B 1A 1B
NOTE: The Auxiliary Contacts on the Oil Tector Remote Alarm are Normally Open only.
Terminals 1A & 1B
High Oil
Terminals 2A & 2B
High Water
Class 2, 24 VDC/VAC (50/60 HZ)
100 Milliamps MAXIMUM
2A 2B1A1B
+ -
Summary of Contents for Aquaflush Z6000
