ZURN Aquaflush Z6000 Installation, Operation, Maintenance And Parts Manual Download Page 57

Page: 57 / 89

Water Heaters

Electric Residential

The purpose of this manual is twofold:

one, to provide the installer with the basic

directions and recommendations for the proper

installation and adjustment of the water heater;

and two, for the owner–operator, to explain

the features, operation, safety precautions,

maintenance and troubleshooting of the water

heater. This manual also includes a parts list.
It is imperative that all persons who are

expected to install, operate or adjust this

water heater read the instructions carefully

so they may understand how to perform

these operations. If you do not understand

these instructions or any terms within it, seek

professional advice.
Any questions regarding the operation,

maintenance, service or warranty of this

water heater should be directed to the seller

from whom it was purchased. If additional

information is required, refer to the section on

“If you need service.”

Do not destroy this manual. Please read

carefully and keep in a safe place for future

reference.

Recognize this symbol as an

indication of Important Safety

Information!

California Proposition 65 Warning:

This product contains chemicals known

to the State of California to cause

cancer, birth defects or other

reproductive harm.

Single and Double Element Models,

With Energy Cover

LISTED

E11867

AP17547-1 (04/15)

Use & Care Manual

With Installation Instructions for the Installer

Summary of Contents for Aquaflush Z6000


























































































Search results

Summary of Contents for Aquaflush Z6000

Reviews:

Related manuals for Aquaflush Z6000

Brands by name

Popular brands

ZURN Aquaflush Z6000, Installation, Operation, Maintenance And Parts Manual

Search results

Summary of Contents for Aquaflush Z6000

Reviews:

Related manuals for Aquaflush Z6000

Brands by name

Popular brands