Zultys MX250, Hardware Manual

Page: 23 / 62

3. Hardware
19
To put the MX250 into console mode during normal operation:
1. Disconnect the Ethernet ports from your system.
2. Press and hold the console button for about two seconds.
The MX250 indicates it has entered Console mode with the Status LED as shown figure 7-5.
Once the MX250 is in console mode, you can access it at the assigned IP address.
To exit the console mode press and hold the console button for two seconds. The MX250 exits the
console mode and restores the status of the LEDs.