Appendix B Label Specification
Table B-5 Fiber Pigtail Interface ID Forma
ID
Meaning
Specification
Example
X: System name
A: Equipment ID
X: The same with the system name
in contract ID
A: IDs of ZTE equipment and
cabinets in one site should be
deployed uniformly and each ID
should be unique.
IP01
B: Subrack ID (number)
The subracks from top to bottom
are numbered in ascending order.
For example, 1–4 for Subrack 1 to
Subrack 4.
1
C: Slot ID (number)
Consistent with the Slot ID on the
subrack
The subrack slot ID of
line interface board: 5
XA-B-C-D
D: Port ID (number and letter)
Consistent with the port ID on the
board or interface panel
Port 3 on Line interface
board
ID format requirements of the fiber pigtail interfaces on the ODF frame side are shown in
Table B-6
.
Table B-6 ODF Fiber Pigtail Interface ID Format
ID
Meaning
Specification
Example
X: System name
A: System ID
X: ODF
A: ODF fram ID
ODF 03
B: Unit module ID
ID of the ODF unit module where the
interface is located
3
C: Row/Line ID
Add “R” (ROW) at the end of Row ID;
add “L” (LINE) at the end of Line ID
2R/2L
XA-B-C-D
D: Port ID
Optical interface ID and
transmit/receive relationship
7R
B.2.4.2 Label Example (Fiber)
The example is to number a fiber connecting from Optical Interface 3 located at Slot 01,
Subrack 1, Cabinet IP01 to Optical Interface 7 located at Line 2 of Module 3, ODF 3. It is
recommended to arrange label content in the way as described in
Figure B-4
.
B-7
SJ-20110901170352-005|2011-10-15 (R2.0)
ZTE Proprietary and Confidential
