Appendix B Label Specification
Figure B-1 Knife-Shaped Label Dimension and Paste Position
B.2.2 Electrical Cable Label
B.2.2.1 Label Content
Mark the labels at two cable ends as follows.
l
One end: “Fr: “Type”” used to indicate cable type and local-end port ID.
l
The other end: “To: “Type”” used to indicate cable type and opposite-end port ID.
The “Type” field represents cable data type, such as “75 Ω”, “120 Ω”, “RS232”.
Recommended ID rules of the electrical cable interfaces on the ZTE communication
equipment side are shown in
Table B-1
.
Table B-1 ZTE Equipment Electrical Interface ID Format
ID
Meaning
Specification
Example
X: System name
A: Equipment ID
X: The same with the system name
in contract ID
A: IDs of ZTE equipment and
cabinets in one site should be
deployed uniformly and each ID
should be unique.
IP01
XA-B-C-D
B-3
SJ-20110901170352-005|2011-10-15 (R2.0)
ZTE Proprietary and Confidential
