Appendix B
Label Specification
Table of Contents
Ÿ
Label Specification Introduction .............................................................................. B-1
Ÿ
Knife-shaped Label................................................................................................. B-2
Ÿ
Rectangular Label .................................................................................................. B-8
Ÿ
Cable Length Label .............................................................................................. B-13
Ÿ
Label Check ......................................................................................................... B-13
B.1 Label Specification Introduction
B.1.1 Label Making Requirements
To clarify cable/fiber pigtail connections and facilitate equipment debugging and
maintenance, it is necessary to label the equipment, cables, and cable distribution frames.
Detailed label making requirements are described below.
l
Label content should be printed rather than written by hand.
l
For ZTE labels, use the printing template that corresponds to the label type. Format
requirements are as follows.
à
Font size for site name: 13.75 pt; font size for others: 9 pt.
à
Font: Bold; Vertical align: middle; Text align: center; If there are too many
characters, font size can be decreased correspondingly.
Note:
Label shape and content can be determined by the user according to the particular
situation. This appendix only introduces the dedicated labels of ZTE.
B.1.2 Label Paste Precautions
Pay attention to the following items when affixing labels to cables.
l
Before sticking a label to a cable, clean the paste position on the cable and ensure
that there is no dust and foreign object.
l
Do not touch the paste surface of the label during label pasting, in case that the label
cannot be firmly pasted.
B-1
SJ-20110901170352-005|2011-10-15 (R2.0)
ZTE Proprietary and Confidential