Appendix B Label Specification
Figure B-2 Knife-Shaped Electrical Cable Label Example
B.2.3 Power Cable Label
B.2.3.1 Label Content
Mark the labels at two cable ends as follows:
l
One end: “POWER (Fr:)” used to indicate power port ID at local end.
l
The other end: “POWER (To:)” used to indicate power port ID at opposite end.
ID rules of the power ports on the ZTE communication equipment side are shown in
Table
B-3
.
Table B-3 ZTE Equipment Side Power Port ID Format
ID
Meaning
Specification
Example
X: System name
A: Equipment ID
X: The same with the system name
in contract ID
A: IDs of ZTE equipment and cabinets
in one site should be deployed
uniformly and each ID should be
unique.
IP01
B: Power cable type (number
and letter)
Consistent with the ID on power cable
PE/-48 V/-48 V RTN
XA-B-D
D: Port ID (number)
Consistent with the ID on power
distribution box
I/II
ID format requirements of the power ports on the user equipment side are shown in
Table
B-4
.
B-5
SJ-20110901170352-005|2011-10-15 (R2.0)
ZTE Proprietary and Confidential
