Zte ZXR10 T8000 Series Hardware Installation Manual Download Page 23

Page: 23 / 61

Chapter 3

Installation of Cluster in 2+8
Mode

Table of Contents

Installation Preparations .............................................................................................3-1

Installation of Cascade Connection Cables.................................................................3-1

3.1 Installation Preparations

Before installing ZXR10 T8000 cluster 2+8, check the installation environment and

prepare related technical documentation, tools, and qualified installation personnel. For

details, refer to section "Installation Preparations" in the

ZXR10 T8000 Carrier-Class

Router Installation Manual (Single Machine)

Before cluster connection, ensure that each ZXR10 T8000 single machine is installed

completely. For detailed installation procedure and caveats, refer to the

ZXR10 T8000

Carrier-Class Router Installation Manual (Single Machine)

In addition, ensure that sufficient cluster dedicated fibers are ready and related cluster

boards are installed.

3.2 Installation of Cascade Connection Cables

3.2.1 Installing Cascade Data Cables

The cascade data cables in the ZXR10 T8000 cluster are optical cables. It is required

that the cascade interfaces of each cascade switching network board (MSPU) on a line

card shelf (LCC) be connected to the cascade interfaces of a central switching network

board (CSFU) on a central switching shelf, so as to form a three-level CLOS switching

architecture. Thus, network processing boards (PFUs) on different line card shelves can

switch data smoothly.

Each MSFU on an LCC provides 8 cascade interfaces. One LCC provides up to 4 MSFUs.

That is, one LCC provides up to 32 cascade interfaces. Each CSFU on a CFC provides 8

cascade interfaces. One CFC provides up to 16 CSFUs. That is, one CFC provides up to

128 cascade interfaces.

The data plane cascade connections of the ZXR10 T8000 cluster 2+8 system are as shown

Figure 3-1

. The interfaces on an LCC are connected to the interfaces of the same color

and number on the CFC.

3-1

SJ-20110901170352-005|2011-10-15 (R2.0)

ZTE Proprietary and Confidential

Summary of Contents for ZXR10 T8000 Series






























































Search results

Summary of Contents for ZXR10 T8000 Series

Reviews:

Related manuals for ZXR10 T8000 Series

Brands by name

Popular brands

Zte ZXR10 T8000 Series, Hardware Installation Manual

Search results

Summary of Contents for ZXR10 T8000 Series

Reviews:

Related manuals for ZXR10 T8000 Series

Brands by name

Popular brands