Zte ZXDSL 9210 (V3.1) Technical Manual Download Page 103

Page: 103 / 182

Chapter

Erro! Estilo não definido.

5-17

packet encapsulation processing and routing; makes statistics on the traffic flows

at various ports. The bearer subsystem implements priority functions.

3. Operation maintenance subsystem: Provides the system with security

management, configuration management, fault management, performance

management, and accounting management, and provides operation interface for

the users.

4. System control subsystem: Provides control interfaces for other subsystem,

monitors the running of system software/hardware, processes the starting and

reconfiguration when the whole system is powered or encounters any

software/hardware fault. The subsystem also implements remote version

upgrade.

5. Service control subsystem: Provides the master control and coordination

functions for other service modules. The service master control module enables

balancing of system resources in various service submodules in the system and

reasonable scheduling of various submodules, so that the system provides

reliable and high-quality service for the users. The subsystem also implements

IP Host user management function and ACL function.

6. Database subsystem: Used for management of various dynamic and static

resources in the system.

7. Operating support platform: Provides the operating system environment

necessary for running other subsystems.

5.6 System Software Subsystem of Embedded BAS

5.6.1 Service Subsystem

The service subsystem consists of the following submodules: Core protocol stack, PPP

submodule, DHCP submodule, DHCP Server submodule, WEB

authentication/PORTAL push-and-pull submodule, 802.1X submodule, NAT

submodule, L2TP submodule, AAA submodule, routing submodule, FTP protocol

submodule, unicast routing module, and VBAS module. The service subsystem is

responsible for the following functions:

1. Protocol running platform for the whole software system.

Summary of Contents for ZXDSL 9210 (V3.1)























































































































































































Search results

Summary of Contents for ZXDSL 9210 (V3.1)

Reviews:

Related manuals for ZXDSL 9210 (V3.1)

Brands by name

Popular brands

Zte ZXDSL 9210 (V3.1), Technical Manual

Search results

Summary of Contents for ZXDSL 9210 (V3.1)

Reviews:

Related manuals for ZXDSL 9210 (V3.1)

Brands by name

Popular brands