Zte ZXC10 CBTS O1, Installation Manual

Page: 95 / 167

Confidential and Proprietary Information of ZTE CORPORATION
95
Grip the waterproof adhesive tapes after wrapping to ensure firm
bonding between the tapes and the feeder connectors. Figure 76
shows this process.
F
I G U R E
7 6 - W
R A P P I N G
9 W
A T E R P R O O F
A
D H E S I V E
T
A P E S
( 3 )
Apply two layers of PVC tape on top of waterproof adhesive tape.
Ensure that the upper layer overlaps the lower layer by half the
width of tape.
Grip PVC tapes and waterproof adhesive tapes to make them
tightly adhered to each other.
To prevent from damage, bundle cable straps tightly at adhesive
tape on both ends.
Feeder Grounding Clip Installation
Take following steps to install grounding clip.
1.
Prepare required tools including paper cutter, flathead screwdrivers,
wrench and sharp-nose pliers.
2. Cut 7/8" sheath according to size of grounding clip.
Figure 77 shows structure of grounding clip.
F
I G U R E
7 7 - G
R O U N D I N G
C
L I P
1. Grounding end 2. Grounding cable
3. Feeder 4. Grounding spring lock
5. Feeder external cooper core 6. Grounding cable cooper piece