Zte ZXC10 CBTS O1, Installation Manual

Page: 64 / 167

ZXC10 CBTS I2 Installation Manual
64
Confidential and Proprietary Information of ZTE CORPORATION
IN6 OUT6 IN7 OUT7
Signal
definition
RX6- RX6+ TX6- TX6+ RX7- RX7+ TX7- TX7+
End A pin
number
35 36 37 38 31 32 33 34
Cable color
Green red 3
Green black 3
Yellow red 3
Yellow black 3
Grey red 3
Grey black 3
Blue red 4
Blue black 4
Note:
’Blue red 1’ stands for there is one red label on blue cable.
’Pink red 2’ stands for there are two red labels on pink cable.
Trunk Cable Processing
Make CC4Y-J32 connector for E1 cable.
Figure 45 shows procedure to make CBTS side connector.
F
I G U R E
4 5 - C C 4 Y - J 3 2 C
O A X I A L
C
A B L E
C
O N N E C T O R
A
S S E M B L Y
Take following steps to make CC4Y-J32 connector.
i. Slip parts 1 and 2 around cable, peel cable end, tin the core wire,
and open shielding layer.
ii. Connect core wire by soldering and screw part 2 to part 3.
iii. Place crimping tube and crimp the connector.