Zte ZXA10 C300, Configuration Manual

Page: 37 / 301

Chapter 2 GPON/XG-PON Service Configuration
2.1 Configuring the GPON ONU Type Profile
Before authenticating the GPON optical network unit (ONU), you need to create an ONU
type profile if the ONU type does not exist.
Context
The ZXA10 C300 supports the following default GPON ONU types.
l
ZTE-F601
l
ZTE-F621
l
ZTE-F622
l ZTE-F625
l
ZTE-F628
l ZTE-F640
l
ZTE-F641
The ZXA10 C300 supports the only one type of XG-PON ONU: ZTE-F220.
On the ZXA10 C300, ZTE-9806, ZTE-F822, and ZTE-F820 are EPON ONU types. If
you need to configure the corresponding GPON ONU type, you can use ZTEG-9806H,
ZTEG-F822, and ZTEG-F820 respectively.
You can use the
show onu-type gpon
command to query the default GPON ONU types.
Configuration Data
Table 2-1 lists the configuration data of the GPON ONU type.
Table 2-1 Configuration Data of the GPON ONU Type
Item Data
ONU type ZTEG-F620
ONU description 4ETH,2POTS
Maximum T-CONT 7
Maximum number of GEM ports 32
Maximum number of switch units per slot 1
Maximum number of flows per switch unit 8
Number of user ports ETH: 4
POTS: 2
Steps
1. Enter global configuration mode.
ZXAN#configure terminal
Enter configuration commands, one per line. End with CTRL/Z.
ZXAN(config)#
2. In PON configuration mode, create an ONU type profile.
2-3
SJ-20130520164529-007|2013-06-30 (R1.0) ZTE Proprietary and Confidential