Zte ZXA10 C300, Configuration Manual

Page: 30 / 301

ZXA10 C300 Configuration Manual (CLI)
FileType : Img
ServerIndex : 2
Not configuration
4. (Optional) Query the auto-backup condition configuration.
ZXAN(config)#show auto-backup condition configure
Cfg-changed Hold-off-time(hours) Max-hold-off-time(hours)
------------------------------------------------------
enable 1 2
– End of Steps –
1.4.4 Configuring the Auto-Save Function
The ZXA10 C300 supports saving configuration automatically.
Steps
1. In global configuration mode, enable the auto-save function.
ZXAN(config)#auto-write enable
2. Configure the time for auto-save operation.
ZXAN(config)#auto-write 02:00:00 may 5 2013
3. (Optional) Query the auto-save configuration.
ZXAN(config)#show auto-write
auto-write global configuration:
----------------------------------------------------
auto-write enable
auto-write 02:00:00 May 5 2013
– End of Steps –
1.5 User Management
Users (operators) refer to the personnel who manage and maintain the ZXA10 C300 after
logging in to it through CLI terminals, including console port, telnet, or security shell ( SSH ).
The user management defines 16 privilege levels (0 – 15). Table 1-8 describes user
privileges.
Table 1-8 User Privilege Description
Privilege Level Description
0–1 When the user logs in and enters operator mode, he can type the
enable
command and the password to enter privilege mode (privilege
level is 15), and uses any commands.
1-20
SJ-20130520164529-007|2013-06-30 (R1.0) ZTE Proprietary and Confidential