ZOTYE JNJ6460BK, Manual

Page: 219 / 294

Cleaning and maintenance of vehicles
219
External maintenance of vehicle
Clean the vehicle
In accordance with the normal washing method to clean the vehicle. In the following
cases, it will cause paint corrosion and corrosion of the vehicle body and parts, shall
immediately clean the vehicle:
● When traveling in the coastal areas;
● When traveling on a road with antifreeze;
● When the cars is stuck with coal tar, resin, bird droppings and dead insects ;
● When traveling in an area containing a large amount of dust, coal ash, dust, iron
filings or chemicals;
●
When the vehicle was visibly soiled by dirt and mud.
Manual cleaning of Zotye cars
When the vehicle body cooling down, clean the vehicle in the shade.
1. Drain the loose dirt with a pipe. Washed away all mud on the bottom of the
vehicle and the wheel sag, or road salt.
2.
Use neutral cleaning agent to cleaning the vehicle, mix the washing agent shall
be performed according to the manufacturer's instructions. Don't wipe it vigorously,
remove dirt with washing agent and water
3.
Must be thoroughly washed. Must be thoroughly washed all the parts with clean
water.
4. In order to prevent the water traces, wipe the body dry with a clean soft cotton
towel Don't wipe it vigorously, otherwise it will scratch the paint surface
Alarm!
The waste gas exhaust makes pipes very hot. When washing the vehicle, take
care not to touch the exhaust pipe before cooling completely, otherwise it will
cause burns.
Notice!
● When washing the vehicle, If you need to lift the front wiper arm from
the windshield, lift the wiper arm at the driver's side first; On the contrary, the
wiper will return to the original position, the wiper arm should restore to the
first front passenger side. If you do not operate in the correct order, it will
cause damage.
●
If the nozzle clogging, do not clean with pin or other objects, otherwise
it will damage the nozzle.
Manipulation Safety Driving guidance Operating guide DIY Technical data Index