ZOTYE JNJ6460BK, Manual

Page: 225 / 294

Cleaning and maintenance of vehicles
225
Corrosion prevention
Check the vehicle inside
Moisture and dust accumulate below the floor mat and caused corrosion. Always
check the bottom of the floor mat to make sure the parts are dry. Must use
appropriate containers for transport chemicals, detergents, chemical fertilizers, salt
and other items and be more careful. If found there is spill or leak, you must
immediately clean and dry it.
Fenders are used on wheels, such as on saline or gravel roads, and fenders can
protect the cars. The bigger the fender size, the closer it is to the ground. We suggest
that the components of the fenders and mounting areas should also be protected
against corrosion. If recommended, the company's special service station is willing
to provide the users with fenders and installation services.
Park the vehicle in a well-ventilated garage or place with a roof.
Don't park your vehicle in a damp, airtight garage.
If the vehicle wash in the garage, or driving through the water or snow road, it will
cause the garage wet and resulting in corrosion. Even if the garage is very dry, if the
ventilation is bad, the wet vehicle will be corroded
Decorative parts and decorative strips
Silver decorative parts and decorative strips are made of pure aluminum or chrome
plated.
To get rid of stains on the decorative strips and attachments, you should use neutral
pH curing agent or chromium curing agent. Paint polishing agent is also not suitable
for curing decorative parts and decorative strips. In addition, the channel automatic
cleaning equipment often use alkaline cleaner before the cars entering, after drying it
can form black or white milk stains on the cars.
Plastic parts
Plastic parts can be cleaned by normal cleaning methods If the stain is not easy to
remove, you can also use a special solvent free plastic cleaning and curing agent.
Paint curing agents should not be used to handle plastic parts.
Paint damage
A small area of paint damage, such as scorings, scratches or stone bumps, should be
painted immediately, in order to avoid corrosion
。 For this case, our company's
special service station is available for the vehicle paint pen or paint spray jar for sale
If corrosion has occurred, it must be completely removed.
Manipulation Safety Driving guidance Operating guide DIY Technical data Index