ZOTYE JNJ6460BK Manual Download

Page: 70 / 294

BFILE

* Small sunroof

Close button

Start button

When the power supply is "ON" gear, the sunroof can be opened or closed. The sun
visor can be moved forward / backward manually to turn on/off.

Alarm!

●

In the course of driving, heads, hands and other parts of the bodies of

occupants must leave the opening part of the sunroof, and otherwise, it may
cause personnel injury when the emergency brakes or accident occurs.

●

When the sunroof is moving, the other parts of the head or hand are not

allowed to extend out of the sunroof.

Notice!

●

Before closing the sun visor, ensure that the sunroof glass is closed to

prevent rainwater from entering the vehicle in rainy days.

●

Do not open the sunroof when the sunroof is frozen, so as not to damage

the sunroof.

Turn-up and closing of sunroof

Turn-up of sunroof

Touch the start button, and the rear part of front glass is lifted upwards, until it
reaches the maximum opening position.

Summary of Contents for JNJ6460BK







































































































































































































































































































Search results

Summary of Contents for JNJ6460BK

Reviews:

Related manuals for JNJ6460BK

Brands by name

Popular brands

ZOTYE JNJ6460BK, Manual

Search results

Summary of Contents for JNJ6460BK

Reviews:

Related manuals for JNJ6460BK

Brands by name

Popular brands