5
FIGURE 1
SK3051
BATTERY BOX
AQUANOT ACTIVE
CONTROLLER
CHARGER
OUTLET
OPERATIONAL
FLOAT SWITCH
HIGH WATER
FLOAT SWITCH
SHOWN FOR CLARITY
1 1/2" INLINE
CHECK VALVE
LOW WATER CUT-OUT
FLOAT SWITCH
(*OPTIONAL)
IMPORTANT: “OFF” LEVEL MUST
BE SET ABOVE PRIMARY PUMP INLET.
*IF YOU PREFER TO USE THE LOW WATER FLOAT, THE SUPPLIED JUMPER
CAN BE REMOVED AND THE LOW WATER FLOAT INSTALLED IN ITS PLACE.
Z CONTROL
GATEWAY
®
®
SK3044
LOW WATER CUT-OUT
FLOAT SWITCH
(*OPTIONAL)
OPERATIONAL
FLOAT SWITCH
HIGH WATER
FLOAT SWITCH
IMPORTANT: “OFF” LEVEL
MUST BE SET ABOVE
PRIMARY PUMP INLET.
SHOWN FOR CLARITY
1 1/2" INLINE
CHECK VALVE
90° ELBOW & TEE SHOWN.
45° ELBOW & WYE CAN
BE USED AS WELL.
DO NOT USE DWV FITTINGS.
*IF YOU PREFER TO USE THE LOW WATER FLOAT, THE SUPPLIED JUMPER
CAN BE REMOVED AND THE LOW WATER FLOAT INSTALLED IN ITS PLACE.
BATTERY BOX
CHARGER
OUTLET
AQUANOT ACTIVE
CONTROLLER
Z CONTROL
GATEWAY
®
®
FIGURE 2
OPERATIONAL
FLOAT SWITCH
HIGH WATER
FLOAT SWITCH
SHOWN FOR CLARITY
1 1/2" INLINE
CHECK VALVE
LOW WATER CUT-OUT
FLOAT SWITCH
(*OPTIONAL)
1" (2.5 cm)
MIN.
IMPORTANT: “OFF” LEVEL
OF FLOAT ASSEMBLY
MUST BE HIGHER THAN
DC BACKUP PUMP
*IF YOU PREFER TO USE THE LOW WATER FLOAT, THE SUPPLIED JUMPER
CAN BE REMOVED AND THE LOW WATER FLOAT INSTALLED IN ITS PLACE.
BATTERY BOX
CHARGER
OUTLET
AQUANOT ACTIVE
CONTROLLER
Z CONTROL
GATEWAY
®
®
SK3052
FIGURE 3
IMPORTANT
To minimize risk of air lock, intake of DC pump must be set above intake of primary pump.
© Copyright 2016 Zoeller
®
Co. All rights reserved.