Page 3
ENGLISH
Zodiac VS FloPro
™
Variable-Speed Pump
|
Installation & Operation Manual
Section 1. Important Safety Instructions
READ AND FOLLOW ALL INSTRUCTIONS
1.1 Safety Instructions
All electrical work must be performed by a licensed electrician and conform to all national, state, and local codes.
When installing and using this electrical equipment, basic safety precautions should always be followed, including the
following:
WARNING
RISK OF SUCTION ENTRAPMENT HAZARD, WHICH, IF NOT AVOIDED, CAN RESULT IN SERIOUS INJURY
OR DEATH.
Do not block pump suction, as this can cause severe injury or death. Do not use this pump for
wading pools, shallow pools, or spas containing bottom drains, unless the pump is connected to at least two
(2) functioning suction outlets. Drain covers must be certified to the latest published edition of ANSI/ASME
A112.19.8.
WARNING
To reduce the risk of injury, do not permit children to use this product.
WARNING
To reduce the risk of property damage or injury, do not attempt to change the backwash (multiport, slide, or full
flow) valve position with the pump running.
WARNING
Incorrectly installed equipment may fail, causing severe injury or property damage.
WARNING
The pump is for fixed installations only and to be used in conjunction with swimming pool equipment (e.g. filters).
The pump is to be installed in accordance with the relevant requirements of the Australian wiring rules NS/NZS
3000.
Also refer to the installation instructions relating to the swimming pool equipment for which the pump will be an
integral part.
The pump is to be supplied through a residual current device (RCD) with a rated residual operating current of
30mA.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified
person in order to maintain proper safety conditions.
