![background image](http://html1.mh-extra.com/html/zodiac/flopro-vs/flopro-vs_instructions-for-installation-and-use-manual_3998427011.webp)
9
EN
2.4 I Connecti ng the user interface (depending on the model)
2.4.1 Default user interface connecti on
• In order to prevent all risk of electrocuti on, which can result in serious injury or loss of life,
check that the appliance has been disconnected from the power supply before performing
the following steps.
• Connecti ons to an RS485 terminal board: 1 = red ; 2 = black ; 3 = yellow ; 4 = green
• Do not cut the RS485 cable as this will prevent the user interface from being reconnected to
the pump and will make it impossible to restore the factory setti ngs. The cable is fi xed to the
pump and cannot be removed or extended.
•
The pump communicates with its user interface using an RS485 cable (4 wires)
.
: pump electric compartment
: pump RS485 terminal board
: pump RS485 cable
: user interface
: user interface RS485 terminal board
Descripti on of the pump's technical compartment
1
ON
2
ON
3
OFF
4
OFF
5
ON
Positi on of the switches for control via the user interface
Summary of Contents for FloPro VS
Page 2: ......
Page 7: ...5 EN 1 4 I Performance curves Flow rate Manometric head...