XPLC300 Motion Controller Hardware Manual V1.5
Connect 232RX and 232TX of RS232 to 232RX and 232TX of the controller
correspondingly, and connect the public ends
“
GND
”
of RS232 communication parties
together.
→
Wiring Notes:
⚫
As above, the daisy chain topology is used for wiring (the star topology structure
cannot be used). When the use environment is ideal and there are no many nodes,
the branch structure also can be used.
⚫
The wiring of RS232 is above, and cross-wiring is needed when receiving and
accepting signals, and it is recommended to use the cross-cable with double-female
head when connecting to the computer.
⚫
Please use STP (Shielded Twisted Pair), especially in bad environments, and make
sure the shielding layer is fully grounded.
⚫
When on-site wiring, pay attention to make the distance between strong current and
Summary of Contents for XPLC300
Page 1: ......
