XPLC300 Motion Controller Hardware Manual V1.5
→
Specification
Item
USB2.0
Highest Communication Ratio
12Mbps
Max Output Current of 5V
500mA
Whether Isolates
No
3.3.
ETHERNET
XPLC300 motion controller has a 100M network port, and it supports MODBUS_TCP
protocol and custom communication, the default IP address is 192.168.0.11. The pin
definition is as follows:
The Ethernet port of the controller can be connected to a computer, HMI, etc. through
an Ethernet cable, and using point to point connection method.
The controller can also be connected to the interchanger through an Ethernet cable,
and then use interchanger to connect to other devices, then multi-point connection can
be achieved. The schematic diagram is as follows:
Summary of Contents for XPLC300
Page 1: ......
