VPLC710 Motion Controller Hardware Manual V1.0
3.2.4.
Wiring: Output ad PWM
Pay attention to select the OUT ports that support PWM function, OUT0~OUT3.
3.2.5.
Wiring: Output as Pulse
VPLC710 has 4 single-ended pulse outputs on board.
This example uses OUT8 and OUT9 to connect the driver to illustrate. After OUT8 and
OUT9 are configured with ATYPE(3)=1, OUT8 is DIR3, OUT9 is PUL3, and the
corresponding pulse driver axis number is 3.
For drivers, E24V or E5V can be connected according to specific specification.
Summary of Contents for VPLC710 Series
Page 1: ...VPLC710 V1 0...
Page 22: ...VPLC710 Motion Controller Hardware Manual V1 0...
