VPLC710 Motion Controller Hardware Manual V1.0
3.1.2.
Cable-Arrangment Requirements
1.
Signal lines and power lines should be routed separately, try to adjust the position of
controllers and drivers in the cabinet, and distribute signal lines and power lines in
different areas.
2.
The positive and negative lines of the power line are routed side by side to avoid
interference caused by a large loop area.
Summary of Contents for VPLC710 Series
Page 1: ...VPLC710 V1 0...
Page 22: ...VPLC710 Motion Controller Hardware Manual V1 0...
