VPLC710 Motion Controller Hardware Manual V1.0
Chapter II System Configuration
2.1.
Connection Configuration
External equipment & Software configuration:
1.
Wired mouse and keyboard.
2.
Displayer.
3.
WIN10 operation system (technical version), ZDevelop development platform, all
kinds of operation systems of machine tool industries.
Note: ZDevelop development platform can be downloaded from our website, or
contact us. For host computer development, please contact us for function library file.
There is MotionRT software built in this product, there is no operation system, users
need to install the operation system by yourselves.
2.2.
Main Properties
Support motion control function and machine vision function.
Up to 16 axes motion control (EthercCAT axis / encoder axis / pulse axis / virtual axis)
Encoder interface supports encoder position measurement, which can be configured
as handwheel input mode.
16 NPN outputs, some outputs can be configured as hardware comparison output,
PWM, pulse axis and other functions. The output current can reach 300mA, which
can drive sone valve solenoid directly.
16 NPN inputs, some high-speed inputs can be configured as latch and encoder.
There is one 100M EtherCAT interface, and 1024 isolated inputs and 1024 isolated
outputs can be extended through EtherCAT bus.
There are four USB3.0 interfaces, it is compatible below with USB2.0 and USB1.0
interfaces, which can be connected to camera, mouse, keyboard, U disk and other
USB external equipment.
Summary of Contents for VPLC710 Series
Page 1: ...VPLC710 V1 0...
Page 22: ...VPLC710 Motion Controller Hardware Manual V1 0...
