iFace100 Series Product User Manual
47
Display Style:
This parameter is used to set the time display mode of the initial
interface. Select “ON” to adopt the 24hour display mode. Select
“OFF” to adopt the 12hour display mode.
Bell:
Set the Bell parameters.
8.2 Bell Setting
★
Lots of companies need to ring their bells to signal the start and end of work
shifts, and they usually manually ring their bells or use electric bells. To lower costs
and facilitate management, we integrate the time bell function into the terminal. You
can set the alarm time and duration for ringing the bell based on your requirements,
so that the terminal will automatically play the selected ring tone and trigger the relay
at the alarm time, and stop playing the ring tone after the set duration.
Tip: Only some models have the ID card options
