5 Communicationrelated Settings
30
5 Communicationrelated Settings
You can set related parameters for the communication between the terminal
and PC, including the IP address, gateway, subnet mask, baud rate, equipment No.
and communication password.
Press
MENU
once.
When the terminal communicates with the PC over Ethernet, you need to
check the following settings:
IP Address
: The IP address is 192.168.1.201 by default and can be changed as
required; the IP address of the terminal and that of the PC cannot be duplicated.
Subnet Mask
: The subnet mask is 255.255.255.0 by default and can be changed as
required.
Gateway
: The gateway is 0.0.0.0 by default. If the terminal and the PC are not
located in the same network segment, you need to set the gateway.
When the terminal communicates with the PC over serial ports (RS485), you need
to check the following settings:
Press
F4/
u
2 times to
select Comm.
Press
OK
once
